What are the precautions for forklift safety

1. The forklift needs to stop halfway. When the engine is idling, the gantry should tilt back. When the engine is idling, there must be someone on the forklift. Goods cannot be suspended in the air. The driver cannot leave the cab. This is absolutely not allowed.

2. When the forklift stops without safe deceleration, it is not allowed to shift to the reverse gear to avoid damage to parts and ensure safety.

3. When lifting to a height of more than 3 meters, the forklift shall pay attention to the falling of the goods above, and safety protection measures must be taken.

4. When the forklift is lifted, try to make the gantry tilt back, and the loading and unloading operation should tilt back and forth within the minimum range.

5. It is very dangerous for the refined forklift to drive or turn when the fork is raised.

6. When the forklift is running, it is prohibited to extend its hands and feet out of the cab. The vehicle cannot carry people, and only one driver can drive.

7. When the forklift is walking, it is necessary to pay attention to the pedestrians on the road, the obstacles on the road, and the problems that may be caused by the uneven road, and pay attention to the obstacles above the forklift.

8. The forklift should drive at a low speed to store the goods. At the same time, pay attention to whether there are any obstacles near the goods or objects that are easy to puncture the tires.

9. When there are goods on the forklift, it is necessary to avoid emergency braking.

10. When tilting the gantry forward and backward, the forklift must stop moving forward or backward.